H2-DRY – drying for Hydrogen gas
Hydrogen is a highly flammable gas that must be handled with care, and hydrogen dryers for compressed hydrogen are usually custom-made to meet specific project requirements. Provided that the level of oxygen (or other reactive component) is reduced to a minimum in the gas mixture, several versions are available, based on operating pressure, temperature and desired pressure dew point.
Regeneration
The type of regeneration is heat regenerated. Depending on the existence and type of liquids available to perform this regeneration/cooling, we then adapt the components to the drying principle, to ensure that a strict minimum of gas will be lost (1-2% maximum when external dry gas is available for regeneration/cooling for example).
Extras
- operating pressure 5 to 50 bar
- operating temperature range (inlet) 1,5 to 40 °C
- pressure dew point -25 to -70 °C
- flow rate on request
- design code for pressure vessels EN 13445
- fluid group 1
Types of dryers
H2-R-DRY is a heat regenerated hydrogen adsorption dryer, with working pressure from 5 to 11 bar.
H2-HP-R-DRY is a heat regenerated hydrogen adsorption dryer, with a working pressure of up to 50 bar.
Project request
These dryers are not off-the-shelf products and are designed according to the customer's specific needs. If you have a project you need help with, use the button and get started.
